Recently, many families started to purchasing home Pulse oximeter on baby in order to monitor blood oxygen saturation at any time. Many online shops are out of stock of oximeters and oxygen generators. Thus, in post-Covid era. Is it necessary to have a blood oxygen meter at home? How to use blood oxygen meter? Is it proper for adults and children to use the same type of pulse oximeter?
An oximeter is a medical device, which are used to measure the concentration of oxygen in a person’s blood. This instrument is not only used to monitor the function of the patient’s respiratory system, but can also be used to monitor the function of the heart.
Blood oxygen saturation is an indicator of oxygen concentration in the blood, indicating the amount of oxygen in the blood as a percentage of all soluble oxygen. Normally, oxygen saturation ranges from 94 percent to 100 percent. If saturation is below 90 percent, it is considered as a sign of hypoxemia. Furthermore, hypoxemia can be caused by airway obstruction, lung infection, heart disease, or other causes.
You may be concerned when considering testing on infants. Don’ worry. It is safe to use oximeters on infants, since oximeter is a non-invasive and painless (needle-free) method with no radiation involved.
Oximeters are a key tool for determining the oxygen needs of newborns, especially those with conditions such as congenital heart disease and respiratory abnormalities. However, the size of adult oximeter may not be suitable for infants.
Pediatric pulse oximeters are generally used in children. They work in the same way as adult oximeters, but pediatric devices are designed to fit smaller fingers. For infants and young children, we highly recommend handheld pediatric oximeter whose probe is placed on the palm or foot of the child. If oximeter shows a reading between 95-100%, the oxygen content of your child are within the normal range.
The finger method is the most common way to get your baby’s pulse oxygen saturation. When using this technique, the probe should be placed in the correct position on the finger. If the device is clamped too tightly, blood circulation to the finger will be restricted. Or, if the device is too loose on the fingers, it has the potential to fall off or allow other light to enter.
During the test, your baby may feel slight pressure, but no pain. First, we keep the pulse oximeter on until both pulse and oxygen saturation are displayed simultaneously. Then, we read the data and remove the device from the finger.
Pulse oximetry can be obtained by approaching the ear. In principle, a translucent probe, which clips onto the baby’s earlobe, connects to a monitoring device. Then you can read the oxygen saturation levels on displays.
If your child is a newborn, we recommend attaching a pulse oximeter to the baby’s palm or foot. After all, The baby’s fingers or ears may still be too small to place the clip.
In rare cases where fingers and ears are not accessible, the pulse oximetry reflex probe can be placed lower on the forehead. Pay attention keep it above the eyebrow and ensure it is away from major blood vessels.
When using this method, baby should be tilted. And than the headband should be attached to the probe for fixture.
The pediatric fingertip pulse oximeter is a rapid and non-invasive method for measuring blood oxygen saturation for infants. Here are the steps to follow:
Children’s oximeter is one of the most important medical instruments to detect children’s blood oxygen saturation. It helps parents to more accurately understand children’s blood oxygen status and make precaution measures to relative diseases.
A pediatric oximeter is a pulse probe used in pediatric cases. This device can accurately determines the wearer’s blood oxygen saturation (Sp02). Moreover, the instrument only needs to be placed on the wearer’s hand or toe for a short period of time to obtain accurate results, without any large equipment room or rough inspection procedures.
The measure is based on a child’s basal pulse, which can be roughly divided into four categories: severely hypoxic (88-90%), moderately hypoxic (91-93%), normal (94-98%), and excellent (over 99%).
The most important standard for the blood oxygen status of children and infants is excellent blood oxygen status. If the pulse is below 88% or above 99%, it does not meet the normal range of blood oxygen status of children and infants. It may cause respiratory diseases or cardiovascular problems.
Moreover, with the development of the traditional health examination procedure, standard of blood oxygen for kids have varied by age. The standard for newborn baby is 95%~97%, while 97%~99% for kids is regarded as normal status.
In addition, if the reading is under normal circumstances, the baby may be accompanied by respiratory failure or other lesions. In this case, it is important to carry out a more accurate diagnosis through blood tests, electrocardiograms and other ways, so as to obtain effective treatment in time.
In summary, children’s oximeter is a safe and reliable medical instrument. It can not only accurately detect children’s blood oxygen status, but also provide a strong datavbasis for timely monitoring and early treatment of children’s health. However, the report of professional blood tests should not be ignored.
This text is for new oxygen therapy users. It introduce whether you need oxygen therapy,…
What is home oxygen concentrator ?If a patient need long-run oxygen therapy throughout the day and night due to diseases like lung problems and heart failure,…
According to BBC news, we find that Fukushima Waste Water Release has been a hot issue…
We are seeing an increasing number of Smart wearable devices, whether they are smart wristbands,…
What Situations Should I Use A Pulse Oximeter Initially, pulse oximeters were used as vital…
With Covid-19 raging globally, the prices of blood oximeters have also started to rise, following…